On file for TitanX
- Paid · free trial
- SMBs, Mid-market, Enterprise
- Cold Email & Outreach
- Written review
What is TitanX?
TitanX (titanx.io) is a B2B sales acceleration dialer combined with a phone intent engine. Architecturally, it sits as a middleware layer between your system of record — HubSpot, Salesforce, Apollo, Outreach, or Salesloft — and the telephony carriers that terminate your calls. It ships two coupled components:
- Phone Intent scoring. A real-time scoring engine that ranks each contact on answer likelihood using aggregated pick-up patterns — time of day, day of week, and historical answer behavior on similar number profiles. Scores sync back to your CRM as record fields.
- Dialer execution. Single-line click-to-call on Starter; parallel dialing with automated AI call dispositioning on Pro. Outcomes write back to CRM activity and disposition fields without manual rep entry.
The problem it solves is specific: most of an SDR's dial block is spent on numbers that never ring. Baseline cold-call connect rates typically run 5–15%, and rep hours are spent dialing in arbitrary list order. TitanX reorders the queue by likelihood-to-answer, with vendor-reported connect-rate lifts of up to 3x. In practice, whether you hit 2x or 3x depends on list hygiene and calling windows — intent scoring changes who you call and when, not whether a dead number is dead.
Who is TitanX for?
Who benefits most:
- High-volume outbound SDR teams running 50+ dials/day where connect rate is the binding constraint on meetings booked
- Orgs already on HubSpot or Salesforce with Outreach or Salesloft sequences generating daily call tasks
- Teams sourcing lists from Apollo, where phone data quality varies widely and prioritization signal has room to pay for itself
- Teams getting flagged "Spam Likely" — dedicated US/EU numbers plus a remediation workflow address carrier labeling
- Sales managers who need disposition data in CRM without depending on rep logging discipline
Who should skip:
- Inbound or expansion teams calling warm accounts — intent scoring adds little when leads already answer
- Teams under ~3 seats, where per-seat cost is hard to justify over a basic click-to-call plugin
- Orgs calling primarily into APAC, LATAM, or MEA — number provisioning is US/EU
- Teams with compliance constraints on parallel dialing or call recording
- Buyers who want a standalone intent-data feed into an existing dialer — TitanX's intent layer is tied to its own dialer
Core Capabilities and Workflows
1. Phone Intent prioritization
Every contact is scored on answer probability in real time. Scores land on the contact/lead record in HubSpot or Salesforce, so managers can build filtered views and report on score-versus-outcome. The call queue is ordered by likelihood-to-answer, front-loading the highest-probability dials into the rep's first hour.
2. Dialing modes
- Single-line (Starter): rep-controlled click-to-call with screen-pop and automatic activity logging.
- Parallel dialing (Pro): multiple lines dialed simultaneously; the first live answer routes to the rep, non-connects drop to voicemail or terminate. Expect 3–5x raw dial throughput per hour versus single-line. Note the distinction: throughput scales with parallelism, connects scale with list quality.
3. AI call dispositioning (Pro)
Post-call outcomes are classified automatically — connected, voicemail, gatekeeper, bad number, no answer — and written to CRM fields. This removes the 1–2 minutes per call reps typically burn on manual logging. Gatekeeper-versus-decision-maker is the common misclassification; spot-check weekly.
4. Number management and spam remediation
Dedicated US/EU numbers with local-presence options. When numbers get flagged by carriers, a remediation workflow handles re-registration and rotation. This is an ongoing operational process, not a one-time setup — flagged numbers can take days to weeks to clear.
5. CRM and sequencer sync
Two-way sync with HubSpot and Salesforce; task-level sync with Outreach and Salesloft so calls completed in TitanX close out inside the sequence. Apollo functions as a list source. The data model covers contacts, call activities, dispositions, and intent scores.
6. Analytics
Connect rate by rep, list, and hour; disposition breakdowns; time-to-connect. The practical use is tuning call windows and pruning dead list segments.
A representative daily workflow
- SDR pulls a call list from Apollo or an Outreach/Salesloft sequence.
- TitanX scores and orders the queue by answer likelihood.
- Rep launches a session (parallel on Pro), works the queue, and drops pre-recorded voicemails on non-connects.
- AI dispositioning logs outcomes to CRM; callbacks queue as tasks.
- Manager reviews connect-rate-by-hour reporting and adjusts call windows.
Pricing and Plans
List pricing as of this review (November 2026), billed per user:
| Plan | List Price | Included | | --- | --- | --- | | Starter | from $99/user/month | Phone intent prioritization, single-line dialing, CRM integrations, voicemail drop, dedicated US/EU numbers (limited allocation) | | Pro | from $199/user/month | Everything in Starter, plus parallel dialing and automated AI call dispositioning |
Billing terms and consumption mechanics:
- Per-seat subscription, monthly or annual. Annual commitments typically price below list — confirm the actual number at contract, not on the pricing page.
- Minutes. Dialer platforms in this category meter calling minutes per seat. Parallel dialing meters every leg: a rep dialing 4 lines simultaneously burns minutes roughly 4x faster than single-line. Model consumption before signing — for a rep making 300 dials/day, overage math often matters more than the seat price.
- Numbers. Dedicated numbers are typically rented per number per month beyond the included allocation. Local-presence numbers across many area codes accumulate fast for national calling motions.
- Overage and minimums. Expect per-minute overage rates above included minutes and minimum seat counts on annual contracts. Get both written into the order form.
- Hidden costs to budget. Invoicing is USD-denominated — non-US finance teams absorb 1–3% in FX spread and card processing. VAT/GST is added at checkout for EU/UK entities rather than baked into list price. Onboarding or data services may be quoted separately on annual deals.
Where does TitanX fall short?
- The 3x connect-rate figure is best-case. Intent ordering improves who you call and when; it does not resurrect disconnected numbers. Teams with stale Apollo data will see modest lifts until enrichment and DNC hygiene are fixed first.
- Parallel dialing compliance exposure. Auto-dialer rules differ by jurisdiction — TCPA interpretation in the US and stricter regimes elsewhere. Legal review of dialing settings and consent basis is non-negotiable for regulated verticals.
- Minute consumption under parallelism. Every simultaneous leg meters. Cap parallel lines per seat and monitor burn weekly, or telephony spend will outrun the seat cost.
- AI dispositioning needs QA. Misclassifications contaminate CRM reporting downstream. Budget ~30 minutes/week of sampling per team.
- US/EU number coverage only. Calling into APAC, LATAM, or MEA means no local presence, lower answer rates, and higher termination costs.
- Spam remediation is reactive. Carrier flagging can idle a number for days to weeks; rotation strategy lands on your ops team.
- USD pricing and FX drag. Non-USD buyers pay conversion spread plus card fees on top of list; Finance should forecast in local currency with a buffer.
- Value is CRM-dependent. If reps don't work from HubSpot/Salesforce tasks, or sequence data is messy, prioritization has little signal to act on. CRM sync also throttles at API rate limits on very large list writes.
- No standalone intent API as a primary use case. You cannot cleanly feed TitanX scores into Orum, Nooks, or an in-house dialer.
How does TitanX compare to alternatives?
| Dimension | TitanX | Orum | Nooks | PhoneBurner | | --- | --- | --- | --- | --- | | List prioritization | Native phone intent scoring drives call order | Relies on your list order | Relies on your list order; AI assists in-call | No intent scoring | | Dialing modes | Single-line; parallel on Pro | Parallel-first architecture | Parallel plus in-call AI assistance | Power/parallel dialer | | AI dispositioning | Automated on Pro | Conversation detection and logging | AI summaries and logging | Manual dispositions | | Numbers/spam | Dedicated US/EU numbers + remediation | Number provisioning and reputation management | Number management | Number purchase/registration | | Entry pricing | $99/user/mo, published | Historically ~$300+/user/mo, quote-based | Quote-based, typically above TitanX entry | ~$149–$179/user/mo, published |
TitanX vs Orum. Orum is the incumbent in parallel dialing with mature conversation detection and enterprise procurement options — list pricing has historically run higher and quote-based. TitanX's wedge is that it decides who to call before the session starts, not just how fast the session runs. Choose Orum for raw parallel throughput and enterprise SLAs; choose TitanX for connect-rate lift per rep-hour at a published, mid-market price.
TitanX vs Nooks. Nooks competes on in-call AI — live assistance, call summaries, coaching, and a virtual salesfloor — and has traction with fast-moving startup sales orgs. Pricing is quote-based and generally lands above TitanX's published entry point. Pick Nooks if in-call AI and coaching workflows are the priority; pick TitanX if pre-call prioritization and predictable per-seat costs matter more.
TitanX vs PhoneBurner. PhoneBurner is a long-standing power dialer with published pricing (~$149/user/month Power Dialer, ~$179 Premium) and no intent layer — you bring your own list order. It's a reasonable choice for small teams that want minimal onboarding and flat billing. TitanX costs more at the Pro tier but adds intent ordering and automated dispositioning that PhoneBurner lacks; PhoneBurner wins on simplicity.
Frequently Asked Questions
How does TitanX's Phone Intent scoring sync into my CRM? Scores are computed in real time and written to fields on the contact/lead record in HubSpot or Salesforce, so you can filter list views, trigger automations, and report score against connect outcomes. Outreach and Salesloft users get task-level sync — calls completed in TitanX close out in the sequencer.
Does parallel dialing create auto-dialer compliance risk? Potentially, depending on jurisdiction and consent basis. US TCPA interpretation around human-initiated dialing matters, and some states are stricter. Have legal define consent bases and dialing configurations before enabling parallel mode, especially in regulated verticals.
How are minutes and extra numbers billed if I exceed plan limits? Included minutes are per seat, and parallel sessions consume minutes on every dialed leg, so burn scales with your parallel factor. Overage meters per minute and additional dedicated numbers rent monthly beyond the included allocation. Confirm overage rates and per-number fees on the order form — they are not always published on the pricing page.
Can I run TitanX standalone with just HubSpot, or do I need Outreach or Salesloft? Standalone works — HubSpot or Salesforce is sufficient for list management, logging, and scoring. The sequencer integrations matter only when call tasks live inside Outreach or Salesloft sequences. Apollo functions as a list source in either setup.
Henryk Wexel runs Quota Engine. He spent a decade selling B2B software and building outbound systems — as a founder, as a seller at Silverfort and Cradlepoint, and as the person on the hook for pipeline numbers. He writes the reviews here because he has bought, deployed, argued about and cancelled most of the tools in this index. Based in Palma de Mallorca.
